A guided, step-by-step walkthrough of Anthem Room Correction (ARC Genesis), used by Anthem receivers and processors and some Paradigm and MartinLogan products. Follow the steps in order. Each page starts with the Beginner steps and ends with a Next step button. The Advanced section on each page goes deeper when you’re ready.
Compatible hardware
ARC Genesis is included with every current Anthem receiver and processor, with its microphone.
| Tier | Model | Type |
|---|---|---|
| Entry | MRX SLM | 5-channel slimline receiver |
| Mid | MRX 740 8K | 11.2-channel receiver |
| High | AVM 90 | 15.4-channel processor |
The setup, step by step
Step 1 · about 15 minutes
Get ready
Install ARC Genesis, connect your computer and set up the subwoofers.
Step 3 · 20 to 30 minutes
Measure and upload
Measure each position, check the graphs and upload the result to your device.
Step 4 · about 15 minutes
Check and fine-tune
Why bass can sound lighter, and the target settings worth adjusting.
Something not working? See Anthem ARC troubleshooting for fixes to the most common errors and problems.
Advanced deep dives
Advanced
Already set up? Go straight to the Advanced section of each step.
| Topic | What it covers |
|---|---|
| Auto and Professional modes, and profiles | The two modes, stored profiles and older ARC versions |
| Wider seating areas | Spreading positions for more seats |
| Reading the graphs and saving your work | The curve viewer, PDF reports and project files |
| Target settings in Professional Mode | Room Gain, Deep Bass, Tilt, correction range and bass management |
New to room correction? Start with How Room Correction Works.